The floors of shopping malls, buildings, hotels… are places that have a lot of impact on the surface due to many people passing by. Cleaning and polishing it regularly is extremely important to ensure a clean environment. Above all, prolonging the aesthetics and lifespan of the floor. There are many types of widely used floors such as tiles, stone floors, concrete, wood… Depending on the type of floor, there will be different cleaning and polishing methods. Let’s learn together how to effectively polish floors of all types.
1. Tile floors
To clean tile floors, you need to clean them regularly. On the floor there is dirt, gravel, and stains from daily activities or on shoes. It is these factors that make the floor no longer shiny. You can use the traditional method of sweeping and mopping to remove them. At the same time, use a vacuum cleaner for more comprehensive cleaning.
With stains and stains that have remained for a long time in the kitchen area, toilet, balcony… Places where water often accumulates on the floor. Over time, they will cause stains and stains, affecting the aesthetics of the house.
How to clean and polish tile floors
We can clean tile floors with just a little kitchen ash. Pour in kitchen ash and pour a little water on the dirty area. Then gently rub the ash evenly. Five minutes later, use a brush to scrub vigorously.
For light stains, when using floor cleaner, add a little salt and apply the detergent evenly onto the floor. Wait 15 minutes, just wipe clean as usual.
To remove moss, you can mix a solution of lime powder and water, it should be of a certain consistency. Then apply the solution to areas with moss. After one night, the moss will peel off, you just need to scrub it with a stiff brush.
The grout lines are covered with dirt, mold, etc., discolored, stained, and black. The tile grout becomes black, or worse, it cracks, damaging the entire tile. Using chemicals will erode the top layer of the grout, thereby taking away the stains that stick to it. However, we should not use this method because in the long term, the tiles may peel off due to corrosive chemicals.
To clean tile floors effectively, you should clean them as soon as they first appear. Do not leave them until they dry out and become lumpy. When left for a long time, these stains penetrate deeply into the floor material. At that time, it is impossible to clean or requires a lot of effort to avoid scratching the floor.
2. Concrete floors
First, prepare some specialized machinery and equipment such as floor polishing chemicals, floor scrubbers… With newly constructed concrete floors, use a floor scrubber with numbers #50, #100 to Treat dents on the floor surface. With old concrete floors, use a grinding disc to remove the coating on the surface and fill in cracks or holes.
Learn more: Summary table of the cheapest industrial floor scrubbers HERE.
Next, it is necessary to clean the concrete surface. It helps increase adhesion to hardeners and polishes. If you want the surface to have the best stability and gloss, you need to apply chemicals 3 times.
When the chemicals have dried, use a polishing machine with numbers #800, #1500, #3000, #8000 to smooth the floor surface.
Finally, clean the floor surface again.
You do not need to maintain the concrete floor after polishing too often or every day. When the floor is scratched and loses its shine, it needs to be polished to restore it.
3. Wooden floors
Wood floors are quite sensitive, so when cleaning it, you should dilute the cleaning solution. When you use alcohol or vinegar to clean, dilute it with clean water. However, with vinegar, it can be diluted or not. Use a towel to soak in the solution and then wipe the dirty floor. You can also use wooden floor cleaning chemicals to remove stubborn stains.
To polish wooden floors, you need to use specialized chemicals. To ensure effective gloss and anti-scratch coating, you should use specialized services. This avoids causing damage to the wooden floor surface.
Learn more: Top 3 most effective Japanese wooden floor cleaners HERE.
4. Stone floor
First, determine the scratches on the stone surface. In case of cracks, use glue of a similar color to fill it and then polish. Choose a suitable polishing machine and grinding blade to create flat, rough grinding surfaces.
Grind in increments up to #1500 or #3000 grinding wheel. At this time, the stone floor surface is flat and shiny depending on the type of stone. Grind until the gloss meets aesthetic requirements, then stop.
Next, polish the stone floor with polishing wax to achieve the desired shine. Use floor polishing pad. Usually used is red pad or white pad depending on the hardness of the stone surface.
Waterproof stone floors using specialized chemicals.
Learn more: What type of stone floor cleaning chemical should I use? HERE.
5. Notes when polishing floor surfaces
Notes when polishing wooden floors
Inspect the floor thoroughly before cleaning
Before cleaning or polishing wooden floors or any other type of floor, checking the floor condition is extremely necessary. Once the damage has been determined, the best solution will be determined.
Polishing newly constructed wooden floors is different from currently used wooden floors
The wooden floorboards are still new, the glossy coating is still intact. Unlike floors that have been used for a while, the surface coating is worn and scratched.
Do not leave the wooden floor wet
A water-soaked floor causes it to quickly deteriorate, making it susceptible to rot and mold inside. When mopping the floor or performing cleaning or polishing, do not leave the floor wet for too long.
Choose the appropriate wooden floor polishing solution
There are many types of specialized chemicals for polishing wooden floors, each with its own characteristics, advantages and disadvantages. There are some popular and commonly used types such as Premium Gloss, Breath Wood, Lemon Oil, Parquet Polish Stanhome, Cana… Depending on the condition of the wooden floor and the type of wood, you can choose the appropriate product.
Notes when polishing stone floors
When scrubbing the floor, you need to do it from the inside out. This prevents cleaning areas from getting dirty again. This is a note for all cleaning, not just natural stone floors.
After completing the work, it is necessary to clean the machinery and cleaning tools. Especially with floor scrubbers or vacuum cleaners, you should not clean them when the machine has just turned off. Do not get water on the engine.
Learn more: Which type of industrial vacuum cleaner is good? HERE.
For places with large floor areas such as factories, shopping centers… the floor is subject to frequent impacts. To have a stone floor that is always clean and shiny, you should perform regular polishing. It is most reasonable to do it every 6 months. For places like family floors that are subject to less impact, you should polish the floor about every 2 years.
Notes when polishing concrete floors
Concrete floors are quite simple to clean, no need to clean every day. You should not let the floor get too scratched because it takes a lot of time, effort, and expense to restore. Avoid contact of sharp objects on the floor. Use pads for vehicle kickstands.
Notes when polishing tile floors
A floor scrubber or polisher helps make the surface cleaner and shinier than before construction was performed. However, in order for the surface to be as bright as when it was first purchased, a specific and precise polishing process is required. If you do not clearly understand the process, you can hire a service to bring the best results. At the same time, you should also use chemicals and cleaning tools to maximize shine.
When buying a floor scrubber, polisher or floor cleaning chemical, make sure you clearly understand how to use the product. To polish tile floors quickly and most effectively, you should use a polishing pad with specialized chemicals to clean the shine and reduce construction time, saving costs.
6. Where to buy genuine floor polish products in Ho Chi Minh City?
TKT CLean specializes in distributing industrial cleaning products, cleaning chemicals, cleaning tools… from leading Italian, Japanese, Chinese brands… such as MLee, Lavor, Ecosophy. … We provide genuine products at competitive prices. In addition, we provide cleaning services for Offices, Companies, Buildings, Commercial Areas, Schools, Hospitals, Factories in a professional and thorough manner while supporting customers. maximized by experienced, hard-working, and dedicated employees. Don’t hesitate to click the BUY NOW button or to receive free consultation at a preferential price, please contact the following HOTLINE number.
09.09.05.80.20
TKT Clean® Green Cleaning Service Company
Head office: 116/34 Street 17, Quarter 5, Linh Trung Ward, City. Thu Duc, HCMC